Classical Siamese Rosewood Round Tea Table with Carved Apron

Buyer Pain Points Addressed

Tea culture retailers, hospitality project buyers, and interior design firms sourcing round tea tables for cultural spaces, hotel lobbies, and high-end residential tea rooms frequently encounter tables that crack along the tabletop within the first year of use. This occurs because the tabletop panel is rigidly fixed to the apron without allowing for natural wood expansion, or because the wood was not properly dried before assembly. Additionally, mass-produced round tea tables often use thin veneered panels over MDF cores that cannot withstand repeated contact with hot teapots and water spillage.

This round Siamese rosewood tea table addresses those concerns with a solid heartwood tabletop, floating-panel construction that allows natural wood movement, and a hand-carved openwork cloud apron motif that adds cultural authenticity. The round profile is dimensioned for intimate tea ceremonies, living room centrepieces, and boutique hotel lounge areas, where the circular form encourages conversation and shared tea service.

Dimensions at a Glance

Openwork Cloud Apron Carving Detail

The apron beneath the tabletop features a traditional Chinese cloud motif, hand-carved in openwork relief. The openwork technique removes the background material entirely, creating a lattice-like pattern that casts decorative shadows when the table is lit from above. Each apron section requires approximately 15 carving hours. The carver uses chisels ranging from 2 mm to 8 mm width, with the flowing cloud curves being the most technically demanding element because they require continuous, smooth cuts along the grain without splintering the dense rosewood.

Cabriole Leg Construction

The four table legs are shaped in the classical cabriole style, with a gentle S-curve that distributes weight efficiently while adding visual elegance. Each leg is carved from a single piece of solid rosewood, with the curve following the natural grain direction to maintain maximum strength. The leg-to-apron connection uses a 16 mm mortise-and-tenon joint reinforced with bamboo dowel pins, ensuring the table can support the weight of a full tea set and withstand the lateral force of daily use.

Manufacturing Workflow

This round tea table follows a four-stage production sequence:

• Stage 1 - Timber Heartwood Selection: Siamese rosewood boards are inspected for heartwood ratio. Only boards with a heartwood percentage exceeding 80 percent proceed to this product line.

• Stage 2 - Kiln Conditioning: Selected timber is kiln-dried to 8 to 12 percent moisture content over a 4-week cycle with gradual temperature ramping. A 48-hour equalization period follows.

• Stage 3 - Frame Joinery and Floating Tabletop: Mortise-and-tenon joints are cut to 16 mm tenon depth on the apron-to-leg connections. The round tabletop panel is fitted as a floating panel within the frame. Bamboo dowel pins reinforce all joints.

• Stage 4 - Openwork Apron Carving and Six-Coat Lacquer Finishing: The cloud motif is carved after frame assembly. Six coats of raw lacquer are then applied by hand, each cured for 24 hours and rubbed with pumice stone.

Quality Inspection

• Heartwood Ratio Verification: Each board is visually inspected for sapwood percentage. Boards exceeding 20 percent sapwood are diverted to other product lines.

• Joint Stress Test: Assembled tables are loaded with 60 kg of distributed weight for 24 hours. Any joint showing visible separation is re-fitted.

• Floating-Panel Movement Check: The tabletop panel is inspected for free movement within the frame groove.

• Carving Relief Depth Check: Openwork apron relief depths are verified with a depth gauge at five points per apron section.

• Moisture Audit: Three-point readings per table. Readings outside 8 to 12 percent require re-conditioning.

Enterprise Capability

Yunxiao Rosewood Furniture Co., Ltd. has produced classical redwood furniture in Xianyou since 2008. The workshop maintains FSC chain-of-custody documentation and CITES export permit registration for Dalbergia cochinchinensis shipments. Production capacity, employee count, and client references are available upon request. OEM carving customization and ODM design development are supported with a 15-day design approval cycle.

Exhibition Experience

Yunxiao Rosewood Furniture Co., Ltd. engages with international buyers through Canton Fair and Shanghai International Furniture Fair participation. Specific booth numbers and dates are available on request. Buyers visiting Xianyou can arrange a workshop tour to inspect timber stock, carving stations, and the lacquer curing room.

Export Packaging and Documentation

The tea table is wrapped in acid-free tissue paper and corrugated cardboard, then packed in an ISPM-15 heat-treated wooden crate with EPS foam corner blocks. Gross weight per crate is approximately 38 kg. Every shipment includes CITES export permits, FSC chain-of-custody certificate, commercial invoice with HS code 9403.60, and a wood drying certificate.