Classical Siamese Rosewood Wardrobe with Carved Panel Doors

Buyer Pain Point and Our Solution

The pain point: wardrobe doors that warp or rack after shipping through humid climates, and carved panels that read as machine-routed imitations. Furniture distributors and hospitality project buyers sourcing wardrobes for master bedrooms, guest suites, and boutique hotels face three recurring problems: doors that warp because the panels were not properly dried or the frame joinery relies on glue alone; machine-routed carving with shallow, uniform patterns that lack the depth of genuine handwork; and mixed wood species where only the visible front is rosewood while hidden structural members are cheaper substitutes, creating inconsistent expansion rates that cause joint failure. For the buyer this means wardrobes that arrive sound but fail within the first year, generating warranty claims and project delays.

Our solution: solid heartwood construction throughout, hand-carved panel doors, and floating-panel construction that allows natural wood movement without cracking. This Siamese rosewood wardrobe uses timber kiln-conditioned to 8-12% moisture over a 4-week cycle, 18 mm tenon-depth mortise-and-tenon joints on rails and 16 mm on stiles, floating panels sized with a 4 mm expansion gap on each side, and two hand-carved panel doors (approximately 30 carving hours per door). The value to you: a wardrobe that passes an 80 kg/24-hour joint stress test and floating-panel movement inspection, designed to stay tight through seasonal humidity swings under normal indoor use, backed by our in-house 80 kg/24-hour joint stress test, and carries a 24-month structural warranty covering joinery failure, frame cracking, and floating-panel binding — a piece your clients can sell on genuine handwork.

Dimensions at a Glance

Hand-Carved Panel Door Detail

The two wardrobe doors feature traditional Chinese floral and botanical motifs, hand-carved in medium relief. The carving sequence involves outlining the motif in shallow relief, then deepening the background to create visual depth. Each door panel requires approximately 30 carving hours. The carver uses chisels ranging from 2 mm to 12 mm width, with the floral petals being the most technically demanding element because they require continuous flowing cuts along the grain without splintering the dense rosewood.

Floating-Panel Construction

The wardrobe doors and side panels are constructed using traditional floating-panel technique. The panel edge is shaped into a tongue that fits into a corresponding groove in the frame, allowing the panel to expand and contract with humidity changes without cracking or pushing the frame apart. This technique is essential for furniture exported to climates with significant humidity variation between seasons.

Manufacturing Workflow

This wardrobe follows a five-stage production sequence:

• Stage 1 - Timber Heartwood Selection: Siamese rosewood boards are inspected for heartwood ratio. Only boards with a heartwood percentage exceeding 80 percent proceed to this product line, since heartwood holds carving detail more cleanly and resists dimensional movement.

• Stage 2 - Kiln Conditioning: Selected timber is kiln-dried to 8 to 12 percent moisture content over a 4-week cycle with gradual temperature ramping. A 48-hour equalization period follows to relieve internal stresses.

• Stage 3 - Frame Joinery and Floating Panels: Mortise-and-tenon joints are cut to 18 mm tenon depth on rails and 16 mm on stiles. Bamboo dowel pins are driven through each tenon to lock the joint against withdrawal, reinforcing the primary frame joinery alongside the corner blocks. Floating panels are sized with a 4 mm expansion gap on each side to accommodate seasonal wood movement. Solid Siamese rosewood corner blocks are installed at every right-angle intersection to reinforce the frame; the zero-metal-fastener construction refers to the primary mortise-and-tenon frame joinery.

• Stage 4 - Panel Door Carving: Door panels are carved after frame assembly. The carver works from a reference drawing but adjusts the floral motif to the grain of each board, ensuring structural integrity at each joint.

• Stage 5 - Seven-Coat Lacquer Finishing: Seven coats of raw lacquer are applied by hand, each cured for 24 hours and rubbed with pumice stone. The final coat achieves a deep satin sheen that highlights the carving depth.

Interior Storage and Lacquer Detail

The wardrobe interior is fitted with a solid wooden hanging rod at 175 cm height and a removable shelf at 110 cm height. All interior surfaces receive the same seven-coat raw lacquer finish as the exterior, so the inside is as smooth and moisture-resistant as the visible face. The deep satin sheen reflects soft light evenly across the interior panels.

Quality Inspection

All checks below are carried out under our in-house QC procedure at the Xianyou workshop; inspection and test records for your order can be provided upon request.

• Heartwood Ratio Verification: Each board is visually inspected for sapwood percentage. Boards exceeding 20 percent sapwood are diverted to other product lines.

• Joint Stress Test (in-house QC procedure): Assembled wardrobe frames are loaded with 80 kg of distributed weight for 24 hours. Pass criterion: no visible joint separation after the full 24-hour load period; any joint showing separation is re-fitted and re-tested before packing. Test records can be provided upon request.

• Floating-Panel Movement Check: Panels are inspected for free movement within the frame groove. Any panel that binds is re-sized.

• Carving Depth Check: Floral relief depths are verified with a depth gauge at five points per door panel.

• Moisture Audit: Three-point readings per wardrobe. Readings outside 8 to 12 percent require re-conditioning.

Enterprise Capability

Yunxiao Rosewood Furniture Co., Ltd. has produced classical redwood furniture in Xianyou since 2008. FSC chain-of-custody documentation and CITES export permit support for Dalbergia cochinchinensis shipments can be provided upon inquiry, with certificate numbers confirmed at the inquiry stage before contract signing; document samples can be provided for buyer review, so compliance can be verified before contract signing. Production capacity, employee count, and client references are available upon request. OEM carving customization and ODM design development are supported with a 15-day design approval cycle.

Export Markets and Factory Visits

Yunxiao Rosewood Furniture Co., Ltd. exports to markets in Europe and North America. Buyers visiting Xianyou can arrange a workshop tour to inspect timber stock, carving stations, and the lacquer curing room.

Export Packaging and Documentation

The wardrobe is wrapped in acid-free tissue paper and corrugated cardboard, then packed in an ISPM-15 heat-treated wooden crate with EPS foam corner blocks. Gross weight per crate is approximately 85 kg. CITES export documentation and FSC chain-of-custody paperwork are prepared for Dalbergia cochinchinensis shipments, with certificate numbers confirmed at the inquiry stage before contract signing; each shipment also includes a commercial invoice with HS code 9403.60 and a wood drying certificate.