Classical Four-Poster Redwood Bedroom Suite 5-Piece

Buyer Pain Point and Our Solution

The pain point: bedroom suites whose pieces arrive from mixed timber batches and whose frames loosen in overseas climates. Importers furnishing boutique hotels or private residences need a coordinated five-piece bedroom suite where grain tone and colour match across the bed, nightstands, wardrobe, and dresser. Sourcing these pieces separately — or from suppliers who mix batches — produces visible colour mismatch between pieces, and frames joined with metal hardware or under-dried timber loosen after the first heating season. For the buyer this means re-ordering mismatched pieces, on-site repairs against the project margin, and a bedroom that reads as assembled from leftovers rather than designed as one room.

Our solution: a five-piece suite built from a single batch of Siamese rosewood with traditional joinery throughout. Every component is cut from the same timber batch, so grain tone and colour stay consistent across the room. The four-poster bed's corner posts are single solid sections — not finger-jointed or veneered — preserving the load path from canopy rail to floor. All frame connections use mortise-and-tenon joints secured with wooden dowels, and wardrobe and dresser panels are floating-panel construction that lets solid wood expand and contract with seasonal humidity without splitting the frame — the exact failure mode buyers see in heated North American winters and air-conditioned European summers. The traditional hand-rubbed raw lacquer finish penetrates the wood rather than forming a brittle film. The value to you: a suite that arrives as one coordinated room, holds its joinery through climate swings, and ships with FSC chain-of-custody and CITES export documentation your customs broker and green-building clients can rely on.

Complete Five-Piece Bedroom Suite Composition

This suite ships as a coordinated five-piece set: one four-poster bed frame (king or queen, selectable at order), two matching nightstands, one two-door wardrobe, and one dresser with an attached mirror. Each piece is built from the same batch of Siamese rosewood (Dalbergia cochinchinensis), so grain tone and color stay consistent across the room. Buyers furnishing a boutique hotel or a private residence can place the suite as delivered without mixing supplementary woods.

Four-Poster Bed Construction

The bed is the structural anchor of the set. The four corner posts are cut from single solid timber sections, not finger-jointed or veneered, which preserves the load path from canopy rail to floor. Posts are joined to the side rails using mortise-and-tenon joints secured with wooden dowels, avoiding metal hardware in the primary frame. The slat base sits recessed into the side rails and is designed to support a standard innerspring or latex mattress without a box spring. Cross-slats are spaced at approximately 90 mm centers to limit mattress sag over years of use.

Dimensions buyers should confirm

King bed frame outer dimensions are approximately 2.10 m by 2.25 m with a post height near 2.05 m. Queen dimensions are approximately 2.10 m by 1.85 m. Clearance under the side rail is roughly 150 mm. Buyers should measure room ceiling height, doorway widths, and any staircase turn landings before placing an order, since the posts ship as single sections and cannot be broken down for tight stairwells.

Material: Siamese Rosewood

Siamese rosewood is a dense hardwood with an air-dry density around 0.95 to 1.05 g/cm³. The heartwood ranges from reddish-brown to a deeper purplish tone with darker streaking. The wood holds carved detail cleanly because of its tight, interlocked grain, which is one reason it is used for classical Ming and Qing lineage furniture. The grain figure across the five pieces in each suite is matched at the workshop, not at the warehouse, which means each set reads as a single batch when placed in a room.

Buyers in Europe and North America importing Dalbergia cochinchinensis should note the species is listed on CITES Appendix II. Yunxiao Rosewood Furniture Co., Ltd. supplies a CITES export permit issued by the Chinese CITES Management Authority with each shipment. Whether a re-export certificate is additionally needed depends on your routing and destination: a re-export certificate is issued by the CITES Management Authority of the country of re-export (for example a transit or intermediary country), not by the original exporter, so importers should confirm their destination country's requirements with the relevant authority and, where applicable, arrange the certificate with their re-exporting party before the shipment departs. Some EU member states also require additional phytosanitary or scientific authority documentation.

Traditional Joinery and Hand-Carved Detail

Joints throughout the suite follow classical Chinese furniture construction: mortise-and-tenon for frame connections, dovetails for drawer boxes, and floating panels housed in grooved frames for wardrobe doors and dresser side panels. The floating-panel technique allows solid wood to expand and contract with seasonal humidity without splitting the frame, which matters for buyers shipping to heated North American winters or air-conditioned European summers.

Carved decorative elements, including post finials, apron skirts, and mirror crest rails, are executed by hand at the workshop. Each post finial is turned and finished individually, so minor variation between finials is normal and expected in hand-worked furniture. Buyers ordering multiple suites for a hotel project should request batch-matched carving if a near-uniform look across rooms is required.

Lacquer Finish

The suite is finished using a traditional raw lacquer (qi) process: multiple thin coats are applied, each cured and hand-rubbed before the next. This builds a surface that is deeper in color than spray lacquer and allows the wood grain to show through. The lacquer layer is not a thick film; it is a penetrating finish that becomes part of the wood surface. Dust particles visible at close inspection under strong light are characteristic of hand-applied lacquer and are not treated as defects at the workshop standard.

Buyers should keep the suite away from direct prolonged sunlight and sudden humidity swings. The lacquer surface can be wiped with a soft dry cloth; avoid alcohol-based cleaners and silicone polish, both of which can cloud the finish over time.

FSC Chain-of-Custody

Siamese rosewood timber in this suite is sourced under FSC chain-of-custody documentation. Yunxiao Rosewood Furniture Co., Ltd. provides FSC transaction claims with each invoice so buyers can pass the claim through to their own customers. Because the wood also carries CITES status, both documentation sets travel together: FSC covers responsible forestry management claims, while the CITES export permit covers the legal trade and movement of the species. Buyers reselling in the EU or North America can rely on the FSC claim for green-building credits and corporate procurement policies that require it.

Buyer FAQ