Classical Redwood Bedroom Wardrobe Suite 6-Piece Set

Buyer Pain Point and Our Solution

The pain point: bedroom suites whose pieces arrive from mixed timber batches and whose wardrobe doors split in overseas climates. Hotel project buyers and residential importers sourcing a complete bedroom suite need a configuration that includes both a bed and case goods in a single coordinated batch. Buying these pieces separately — or from suppliers who mix batches — risks grain and colour mismatch between pieces, and wardrobe doors built with glued-in panels split their frames when solid wood expands and contracts through heated North American winters or air-conditioned European summers. For the buyer this means re-ordering mismatched pieces and on-site repairs against the project margin.

Our solution: a six-piece suite from a single timber batch with floating-panel construction throughout. Every component — panel bed, two nightstands, two-door wardrobe, dresser, and mirror — is cut from the same Siamese rosewood batch, kiln-dried to 8-12% moisture and finished as a single production lot, so colour and grain stay consistent across the room. The wardrobe doors use floating-panel construction: the solid panel sits in a grooved frame without glue, allowing seasonal wood movement without splitting the frame — the exact failure mode buyers see in overseas climates. All drawer boxes use hand-cut dovetails on wooden runners, and the bed frame is load-tested with 150 kg for 24 hours. The value to you: a suite that arrives as one coordinated room, wardrobe doors with floating-panel construction designed to accommodate seasonal wood movement in heated and air-conditioned interiors, and drawers built for smooth daily operation under normal indoor use — backed by a 24-month structural warranty.

Six-Piece Configuration

• 1 panel bed frame (king 180 cm x 200 cm or queen 150 cm x 200 cm, selectable at order)
• 2 matching nightstands (55 cm x 42 cm x 58 cm each)
• 1 two-door wardrobe (120 cm x 60 cm x 210 cm)
• 1 dresser (140 cm x 50 cm x 85 cm)
• 1 matching mirror (90 cm x 70 cm)

The standard six-piece configuration ships without carved detailing. Hand carving on the headboard panels and wardrobe doors is available as an optional customization — request it at inquiry for a quotation. Buyers who need a larger wardrobe can substitute a three-door 180 cm version at an adjusted price. Mention the wardrobe size preference at inquiry.

Dimensions at a Glance

Floating-Panel Wardrobe Construction

The wardrobe doors use a floating-panel technique: the door frame is assembled first with grooved stiles and rails, then a solid wood panel is inserted into the groove without glue. This allows the panel to expand and contract with seasonal humidity changes without splitting the frame, which is critical for shipments to heated North American winters or air-conditioned European summers. The wardrobe interior is fitted with a hanging rod at 175 cm height and a removable shelf at 110 cm height. The rod bracket is mortised into the side panel, not surface-mounted.

Dovetail Drawer Construction

All drawer boxes in the dresser and nightstands use hand-cut through-dovetail joints at the front corner and half-blind dovetails at the rear. The dovetail pins are cut at a 1:6 ratio, which is the traditional Chinese furniture standard for hardwood drawers. Drawer bottoms are set in grooved sides and slide on wooden runners, not metal slides. This construction method allows the drawer to be repaired without disassembling the case.

Manufacturing Process

This suite follows a five-stage production sequence:

• Stage 1 - Batch Timber Allocation: A single Siamese rosewood timber batch is allocated to each six-piece suite to ensure colour and grain consistency. The batch is kiln-dried to 8 to 12 percent moisture content with a 48-hour equalization period.
• Stage 2 - Component Cutting and Grain Matching: Bed frame posts, wardrobe stiles, and dresser rails are cut from boards with the straightest grain. Panel stock for wardrobe doors and dresser sides is selected for figure consistency.
• Stage 3 - Joinery Cutting: Bed frame post-to-rail connections use 20 mm tenon-depth mortise-and-tenon joints. Wardrobe door frames use 16 mm tenons. Dresser rail-to-leg connections use 18 mm tenons. Drawer dovetails are cut by hand.
• Stage 4 - Assembly and Floating-Panel Installation: Case goods are assembled with floating panels set into grooved frames. Bed frames are dry-fitted before glue application. Dovetail drawer boxes are assembled and fitted to their runners.
• Stage 5 - Lacquer Finishing: Seven coats of raw lacquer are applied by hand, each cured for 24 hours and hand-rubbed with pumice stone. The final coat achieves a satin sheen that shows the rosewood grain beneath.

Quality Inspection

• Panel Movement Test: Floating panels are tested by measuring the gap at the groove edge before and after a 48-hour humidity chamber cycle. Panels binding in the groove are re-fitted.
• Bed Frame Load Test: The assembled bed frame is loaded with 150 kg of distributed weight for 24 hours. Any joint showing separation is re-fitted. The 24-hour load test record is available with your inquiry for hotel project documentation.
• Dovetail Fit Check: Each drawer is cycled 50 times on its runner. Any drawer binding or loosening is re-fitted.
• Moisture Audit: Three-point readings per piece. Readings outside 8 to 12 percent require re-conditioning.
• Finish Inspection: Surface inspected under 5000K LED lighting at 30 cm distance. Defects are reworked before packing.

Enterprise Capability

Yunxiao Rosewood Furniture Co., Ltd. has produced classical redwood furniture in Xianyou since 2008. The workshop maintains FSC chain-of-custody documentation and CITES export permit registration for Dalbergia cochinchinensis shipments. Monthly production capacity is 10 to 15 complete six-piece suites. Client references are available upon request. OEM custom dimensions and ODM design development are supported with a 15-day design approval cycle.

Trade Fair Experience

Yunxiao Rosewood Furniture Co., Ltd. engages with international buyers through Canton Fair and Shanghai International Furniture Fair channels. Specific booth numbers and dates are available on request. Buyers visiting Xianyou can arrange a workshop tour to inspect timber stock, joinery stations, and the lacquer curing room.

Packaging and Export Documentation

The bed frame ships flat-packed in one crate. The wardrobe ships flat-packed (stiles, rails, panels, and shelf separated) in a second crate. The dresser and two nightstands ship fully assembled and are packed in a third crate with the mirror. All packaging uses ISPM-15 heat-treated timber with EPS foam corner blocks. Total gross weight is approximately 220 kg. Every shipment ships with the FSC certificate, a commercial invoice with HS code 9403.60, and a wood drying certificate. CITES export permits are applied for per shipment and provided with the shipping documents once issued — buyers should confirm their own country's CITES import permit timeline when planning delivery.